https://www.jonyautoparts.com/car-cooling-fan/
1.Identify the type and model of the cooling fan, and identify whether the lugs used by this product are in line with the desired product.
2.Identify the wire diameter of the enameled wire, whether it is consistent with all the required specifications, and the lug cannot be placed on one side of the corner enameled wire.
3.Turn on the power switch of the cooling fan, and check that the model displayed on the machine must match the winding product.
4.Pass the enameled wire out of the winding slot, into the cutting edge, and set the stator into the mold.
5.According to the running direction of the fan blade, distinguish the positive and negative of the lugs on it.
6.Take the wound nails out of the mold, check whether there is a single wire exposed in the wire groove, and then reshape them into the plastic frame
7. After the above wiring steps are completed, you can turn on the start switch to check the operation of the cooling fan.
https://www.jonyautoparts.com/car-cooling-fan/
